METERS
First line checks
1. Does the client have Power on site? 2. Does the POE unit have Power? 3. Are both network Cables Plugged into the POE? 4. If the service is down: Remove the Outside Antenna Cable(Connected to the OUT Port) for 30 seconds of the POE and reset it ...
What to do if meter rejects token
This SOP applies to all meters PROCEDURE: 1. Meter number: Ask the customer to confirm that the meter number on the token and the meter number on the meter is the same. If the meter number is not shown, the customer can enter the relevant short code ...
Sensus Meter Video Guide
Sensus Meter Briefing
Inhemeter Spilt
Operation manual
Enlight Sienna / DIN-R PLC Meter
Attached is the Enlight Sienna training manual and also the short codes.
Sensus Prepaid Water user Guide V5A
To turn on the CIU for the first time remove the paper battery strip located at the back of the CIU in the battery compartment. Pairing the CIU to the Meter On the CIU press #92#. The CIU requests a PIN code. Enter 6171 (default - unless you changed ...
Sensus Prepaid Reference Guide V3A
To turn on the CIU for the first time remove the paper battery strip located at the back of the CIU in the battery compartment. Pairing the CIU to the Meter On the CIU press #92#. The CIU requests a PIN code. Enter 6171 (default - unless you changed ...